How to Make Pour Over Coffee Without a Scale: The Easy Way

Do you love the taste of pour over coffee, but don’t have a scale? Don’t worry – you can still make delicious pour over coffee without one!

In this blog post, we will teach you all the elements on how to make pour over coffee without a scale using an easy and foolproof method. So get your favorite beans ready and let’s get started!

[Table of Contents]

How to make pour over coffee without a scale?

You can make pour over coffee without a scale by using a coffee measuring spoon. Fill the measuring spoon with coffee grounds and level it off. Then, slowly pour hot water over the grounds and wait for the desired brew time. Once finished, discard the coffee grinds and enjoy your delicious cup of coffee!

If you do not have a coffee measuring tablespoon, then we can recommend two other ways to make pour over coffee without a scale. You can either use volume measurements (cups or tablespoons), or you can use weight measurements (ounces).

Volume measurement

To make pour over coffee with volume measurements, you’ll need to measure the amount of water and coffee grounds that you’re using. For every cup of water, you’ll want to use about 2 tablespoons of coffee grounds. You can also adjust this ratio depending on how strong you want your coffee to be.

Weight measurement

To make pour over coffee with weight measurements, you’ll need to use an accurate kitchen scale. For every ounce of water, you’ll want to use about .25 ounces of coffee grounds. Again, you can adjust this ratio depending

How to measure coffee without a measuring spoon?

Measuring coffee without a special coffee measuring spoon can be done with a simple household measurement like a tablespoon.

A tablespoon can hold about 3-4 grams of coffee, so if you’re making a cup of coffee, you’ll want to use two tablespoons of grounds.

A kitchen scale or coffee measuring spoon is the most accurate way to measure coffee, but there are a few other ways to do it if you don’t have these on hand.

The first thing you’ll need to do is determine how much water you’ll be using. A good rule of thumb is to use about twice as much water as coffee.

Once you know how much water you’ll be using, you can start measuring the coffee. For every 6 ounces of water, you’ll need 1 ounce of coffee.

If you don’t have a liquid measuring cup, you can also use a standard cup or mug. Just remember that 1 cup equals 8 ounces.

Once you’ve measured out the coffee, add it to your brew container along with the appropriate amount of water. Water ratio for coffee is important, so make sure you don’t add too much or too little.

Now it’s time to brew! No matter if you are using a coffee dripper or standard coffee maker, just follow the instructions for your chosen brewing method and enjoy your great cup of coffee.

How do you measure the perfect ratio for pour over coffee?

Pour over coffee is becoming increasingly popular for its clean taste and its ease of preparation. Many coffee aficionados believe that pour over coffee is the best way to brew a cup of coffee.

Making pour over coffee can be somewhat challenging, as it requires precise measurements. The good news is that there are a few simple tips that can help you get the perfect cup of pour over coffee every time.

  1. It is important to start with fresh, filtered water. This will ensure that your coffee doesn’t have any unwanted flavors.
  2. Measure out the correct amount of coffee grounds – typically, this is about one tablespoon of grounds per six ounces of water.
  3. Once you have your grounds and water measured out, it is time to start brewing. Place the filter in the cone and wet it with hot water to pre-heat the cone and prevent sticking.
  4. Slowly pour the hot water into the cone in a spiral motion, allowing it to evenly saturate the grounds.
  5. Once all of the water has been added, allow the coffee to steep for about three minutes before carefully removing the filter.

If done correctly, you should now have a perfect cup of pour over coffee.

Here is an extra tip if you brew coffee using whole bean coffee instead of pre-ground coffee: always grind your beans fresh! A coffee grinder can make all the difference in the taste of your coffee so invest in a good one!

Coffee beans start to lose their flavor as soon as they are ground, so grinding them just before brewing coffee will ensure that you have the freshest, best tasting cup of coffee possible.


How can I measure coffee without a scoop?

There’s no need to panic if you can’t find your coffee scoop. There are a few simple ways to measure coffee without one.

You can use a spoon! A tablespoon is about the same size as a standard coffee scoop. So, if you need two scoops of coffee, use two tablespoons.

You can also use a measuring cup. A standard cup of coffee is eight ounces, so you would need two cups of water for every scoop of coffee.

By using one of these simple methods, you can easily measure coffee without a scoop.

How many tablespoons ground coffee for pour over?

The answer to this question depends on a few factors, including the type of coffee you are using, the strength of the coffee, and your personal preferences.

For a standard cup of coffee, we recommend using two tablespoons of ground coffee. However, if you like your coffee on the weaker side, you can use one tablespoon. If you prefer a much stronger brew, you can use three tablespoons.

When it comes to pour over coffee, it is also important to pay attention to the grind. A finer grind will result in a more concentrated cup of coffee, while a coarse grind will produce a weaker brew.

Experiment with different grinds and ratios until you find a combination that suits your taste.

How can I measure coffee grounds without a scale?

Measuring coffee grounds can be tricky, especially if you don’t have a scale on hand. The best way to measure coffee grounds is by using a coffee scoop. A typical coffee scoop holds two tablespoons of coffee, which is the appropriate amount for most coffee makers.

Another method of measuring coffee grounds is by using your cup as a measure. Most coffee cups hold eight ounces of liquid, so you would need to use approximately one-fourth cup of coffee grounds for every cup of water.

If you are making a large pot of coffee, you can estimate the amount of grounds you will need by using the “one cup per person” rule. For example, if you are making coffee for four people, you would need to use four cups of water and one cup of coffee grounds.

Final Thoughts

Now you know how to make pour over coffee without a scale. If you don’t have one, or if you want to perfect your technique, give this method a try.

How much coffee grounds you use will depend on your personal preferences, so be sure to experiment until you find the perfect ratio for you.

With a little practice, you’ll be able to make delicious fresh coffee that will rival anything from your favorite cafe.

How useful was this information?

Click on a star to rate it!

We are sorry that this information was not useful for you!

Let us improve this post!

Tell us how we can improve.

Similar Posts